products

Construction Stainless Steel Panels , Stainless Steel Sheet Roll Continuous Casting Slab Material

Basic Information
Place of Origin: CHINA
Brand Name: SINOY
Certification: SGS, TUV, ISO
Model Number: 316
Minimum Order Quantity: 1 Tons
Price: Negotiable
Packaging Details: waterproof paper and steel strip reinforcement,one package about 2 tons,Load in 20GP
Delivery Time: 3-5 working days
Payment Terms: T/T, L/C
Supply Ability: 800 Tons per month
Detail Information
Name: Hot Rolled 316 Finish Stainless Steel Plate Other Material: 201 202 304 304L 316L 321 310S 410s 430 2205 904L Duplex
Surface: BA, 2B , HL , Mirror , Polish , Brush , PVC Standard: JIS, AISI, ASTM, GB, DIN, EN ,etc
Thickness: 3-14mm Width: 1240mm , 1500mm
Length: 2000 3000mm 6000mm Or As Customized Trade Term: FOB , CFR , CIF, CNF , EXW
Edge: Slit,Mill Technique: Hot Rolled
High Light:

mirror finish stainless steel sheet

,

stainless steel sheet roll


Product Description

Good Quality Hot Rolled 316 Finish Stainless Steel Plate

 

Hot-Rolled Stainless Steel Plate:

Continuous casting slab or slab slab is used as raw material, heated by step heating furnace, dewatered by high pressure water and then into rough rolling mill.
The rough rolling material passes through the cutting head and tail and then enters the finishing mill to carry out computer controlled rolling. After the final
rolling, it is subjected to laminar cooling (computer controlled cooling rate) and coiler winding, which becomes a straight hair roll. The head and tail of the straight hair roll are often in the shape of a tongue and a fishtail. The thickness and width are poorly accurate, and the side has frequent defects such as a wave shape, a folded edge, and a tower shape. The weight of the coil is heavier and the inner diameter of the coil is 760 mm.

 

Hot rolled plate
Specification
(Thick)
Big Deviation Normal Deviation Small Deviation No Deviation
3.0mm 2.6mm-2.75mm 2.75mm-2.85mm 2.86mm-2.9mm no less than 2.9mm
4.0mm 3.5mm-3.6mm 3.6mm-3.75mm 3.76mm-3.95mm no less than 3.95mm
5.0mm 4.5mm-4.6mm 4.6mm-4.75mm 4.75mm-4.95mm no less than 4.95mm
6.0mm 5.4mm-5.6mm 5.6mm-5.75mm 5.75mm-5.85mm no less than 5.85mm
8.0mm 7.3mm-7.5mm 7.5mm-7.65mm 7.65mm-7.85mm no less than 7.85mm
10.0mm 9.2mm-9.3mm 9.3mm-9.6mm 9.6mm-9.85mm no less than 9.85mm
12.0mm 11.1mm-11.2mm 11.2mm-11.6mm 11.6mm-11.85mm no less than 11.85mm
14.0mm 13.1mm-13.2mm 13.2mm-13.6mm 13.6mm-13.85mm no less than 13.85mm

 

316 stainless steel sheet

 

Corrosion Resistance :

Grade 316 has good resistance to a wide variety of corrosive enviornments, including nitric acid and some organic acids. It attains its maximum corrosion resistance when in the highly polished or buffed condition. In general its resistance to pitting and crevice corrosion resistance is close to that of grade 316. Stress corrosion cracking resistance of Grade 316 is very high, as it is for all ferritic grades.

 

316 Chemical composition:
C Si Mn Cr Ni S P
0.08 ≤1.0 ≤2.0 16.0~18.0 10.0~14.0 ≤0.03 ≤0.045
mechanical properties:
Tensile strength σb (MPa) Conditions yield strength 0.2 sigma (MPa) Elongation % (min) Hardness      
520 205 40 ≤187HB ≤90HRB ≤200HV      
 

Data of Other Grades Chemical Composition :

Typical chemical composition
% 304 304L 310S 316L
C 0-0.07 0-0.03 0.25 0.03
Mn 0-2.0 0-2.0 2.00 2
Si 0-1 0-1 1.50 0.75
P 0-0.05 0-0.05 0.045 0.045
S 0-0.02 0-0.02 0.03 0.03
Cr 17.5-19.5 17.5-19.5 24.0-26.0 16.0-18.0
Ni 8-10.5 8-10.5 19.2-22.0 10.0-14.0
Mo     0.75 2.00-3.00
N       0.1
Cu     0.50  
Fe Balance Balance Balance  

Applications

Typical applications for 430 grade include:
Linings for dish washers
Refrigerator cabinet panels
Automotive trim
Lashing Wire
Element Supports
Stove trim rings
Fasteners
Chimney Liners

 

Factory and Machinery Equipment :

We had our own factory to do slitting re-rolling and finish treatment machine,PVC and interleaving paper we will using with our machine for you,could protect stainless steel surface from damage or any scratches,

1. CNC Flame Cutting Machine

2. CNC Plasma Cutting Machine

3. CNC Laser Cutting Machine

4. Bending Machine

5. Shearing Machine

6. Punch Machine

7. Driving Machine

Packing

Cold Rolled waterproof paper and steel strip reinforcement,one package about 2 tons,Load in 20GP / 40GP

Construction Stainless Steel Panels , Stainless Steel Sheet Roll Continuous Casting Slab Material 0Construction Stainless Steel Panels , Stainless Steel Sheet Roll Continuous Casting Slab Material 1

 

WHY US?

Q1. How do you control quality ?
A1: Mill Test Certification is supplied with shipment, Third Party Inspection is available.

Q2. What are the advantages of your company ?
A2: We have many professionals, technical personnel, more competitive prices and best after-dales service than other stainless steel companies.

Q3. How many coutries you already exported ?
A3: Exported to more than 50 countries mainly from America , Russia , UK , Kuwait, Egypt ,Brazil , UAE , Germany , Dubai , Saudi Arabia ,  Iran , Turkey , Jordan , Malaysia , Singapore , etc.

Q4. Can you provide sample ?
A4: Small samples in store and can provide the samples for free.
Customized samples will take about 5-7days

 

 

 

Contact Details
Lily

Phone Number : +8618626358302

WhatsApp : +8618626358302