products

304 Structural Stainless Steel Sheet , Mirror Finish Stainless Steel Sheet 4x8 Decorative

Basic Information
Place of Origin: CHINA
Brand Name: Tisco BAOSTEEL ZPSS JISCO SINOY
Certification: SGS, TUV, ISO
Model Number: 201 304 430 410
Minimum Order Quantity: 1 Tons
Price: Negotiable
Packaging Details: cold rolled waterproof paper and steel strip reinforcement,one package about 2 tons,Load in 20GP
Delivery Time: 3-5 working days for regular size,
Payment Terms: T/T, L/C
Supply Ability: 800 Tons per month
Detail Information
Name: Stainless Steel Plate / Coil , Hot Rolled Steel Sheet Other Grade: 202 304L 316L 321 310S 2205 904L Duplex
Surface: NO.1 BA, 2B , HL , Mirror , Polish , Brush , PVC Standard: JIS, AISI, ASTM, GB, DIN, EN ,etc
Thickness: 3-14mm Width: 1240mm , 1500mm
Length: 2000 3000mm 6000mm Or As Customized Trade Term: FOB , CFR , CIF, CNF , EXW
Edge: Slit,Mill Technique: Hot Rolled
High Light:

mirror finish stainless steel sheet

,

stainless steel sheet roll


Product Description

201 304 430 410 Stainless Steel Plate / Coil , Hot Rolled Steel Sheet

 

Sino Yuan is one of most prominent Stainless Steel Stockholder and Service Center providing Stainless Steel to various industries in the region. Sino Yuan's stock holds the entire range of stainless steel like sheets, coils, pipes for decoration and industry,round bars in different grades(201 SS304 304L 316 316L 321 310S 309S 430 410 2205 904L)and sizes specially stocked to meet the local industrial demands as well as the International Mraket.

 

 

Hot-Rolled Stainless Steel Plate:

Continuous casting slab or slab slab is used as raw material, heated by step heating furnace, dewatered by high pressure water and then into rough rolling mill.
The rough rolling material passes through the cutting head and tail and then enters the finishing mill to carry out computer controlled rolling. After the final
rolling, it is subjected to laminar cooling (computer controlled cooling rate) and coiler winding, which becomes a straight hair roll. The head and tail of the straight hair roll are often in the shape of a tongue and a fishtail. The thickness and width are poorly accurate, and the side has frequent defects such as a wave shape, a folded edge, and a tower shape. The weight of the coil is heavier and the inner diameter of the coil is 760 mm.

 

Hot rolled plate
Specification
(Thick)
Big Deviation Normal Deviation Small Deviation No Deviation
3.0mm 2.6mm-2.75mm 2.75mm-2.85mm 2.86mm-2.9mm no less than 2.9mm
4.0mm 3.5mm-3.6mm 3.6mm-3.75mm 3.76mm-3.95mm no less than 3.95mm
5.0mm 4.5mm-4.6mm 4.6mm-4.75mm 4.75mm-4.95mm no less than 4.95mm
6.0mm 5.4mm-5.6mm 5.6mm-5.75mm 5.75mm-5.85mm no less than 5.85mm
8.0mm 7.3mm-7.5mm 7.5mm-7.65mm 7.65mm-7.85mm no less than 7.85mm
10.0mm 9.2mm-9.3mm 9.3mm-9.6mm 9.6mm-9.85mm no less than 9.85mm
12.0mm 11.1mm-11.2mm 11.2mm-11.6mm 11.6mm-11.85mm no less than 11.85mm
14.0mm 13.1mm-13.2mm 13.2mm-13.6mm 13.6mm-13.85mm no less than 13.85mm

 

Hot-rolled sheet has relatively low strength, poor surface quality (low oxidation/smoothness), but good plasticity, generally medium and heavy plate, cold-rolled sheet: high strength, high hardness, high surface finish, generally thin sheet, can be used as stamping With the board.
Hot-rolled steel sheet, mechanical properties are far less than cold processing, second only to forging, but with good toughness and ductility

 

CHEMICAL COMPOSITION

201 C Si Mn P S Ni Cr
≤0.15 ≤1.00 5.5~7.50 ≤0.050 ≤0.03 ≤1 16.00~18.00

Data of Other Grades Chemical Composition :

Typical chemical composition
% 304 304L 310S 316L
C 0-0.07 0-0.03 0.25 0.03
Mn 0-2.0 0-2.0 2.00 2
Si 0-1 0-1 1.50 0.75
P 0-0.05 0-0.05 0.045 0.045
S 0-0.02 0-0.02 0.03 0.03
Cr 17.5-19.5 17.5-19.5 24.0-26.0 16.0-18.0
Ni 8-10.5 8-10.5 19.2-22.0 10.0-14.0
Mo     0.75 2.00-3.00
N       0.1
Cu     0.50  
Fe Balance Balance Balance  

Welding
Excellent weldability by all standard fusion and resistance methods, both with and without filler metals. Heavy welded sections in Grade 201 require post-weld annealing for maximum corrosion resistance. 

Machining
 Stainless steel tends to work harden if machined too quickly. For this reason low speeds and constant feed rates are recommended.

 

Factory and Machinery Equipment :

 

We had our own factory to do slitting re-rolling and finish treatment machine,PVC and interleaving paper we will using with our machine for you,could protect stainless steel surface from damage or any scratches,

 

1. CNC Flame Cutting Machine

2. CNC Plasma Cutting Machine

3. CNC Laser Cutting Machine

4. Bending Machine

5. Shearing Machine

6. Punch Machine

7. Driving Machine

304 Structural Stainless Steel Sheet , Mirror Finish Stainless Steel Sheet 4x8 Decorative 0

Packing

 

waterproof paper and steel strip reinforcement,one package about 2 tons,Load in 20GP / 40GP

304 Structural Stainless Steel Sheet , Mirror Finish Stainless Steel Sheet 4x8 Decorative 1

 

WHY US?

Q1. How do you control quality ?
A1: Mill Test Certification is supplied with shipment, Third Party Inspection is available.

Q2. What are the advantages of your company ?
A2: We have many professionals, technical personnel, more competitive prices and best after-dales service than other stainless steel companies.

Q3. How many coutries you already exported ?
A3: Exported to more than 50 countries mainly from America , Russia , UK , Kuwait, Egypt ,Brazil , UAE , Germany , Dubai , Saudi Arabia ,  Iran , Turkey , Jordan , Malaysia , Singapore , etc.

Q4. Can you provide sample ?
A4: Small samples in store and can provide the samples for free.
Customized samples will take about 5-7days

 

 

 

 

Contact Details
Lily

Phone Number : +8618626358302

WhatsApp : +8618626358302